PAPER REFERENCE: ICF10010130R FATIGUE STRENGTH AND FRACTURE MECHANISM OF SILICON NITRIDES STUDIED BY AE WAVEFORM SIMULATION A. Yonezu, T. Ogawa and M. Takemoto Department of Mechanical Engineering, Aoyama Gakuin University, 6-16-1 Chitosedai, Setagaya, Tokyo 157-8572, Japan ABSTRACT In order to evaluate statistical characteristics of static and cyclic fatigue strength of a toughened silicon nitride, both the quasi-static loading test and ∆P-increasing-type cyclic loading test were conducted with simultaneous acoustic emission (AE) monitoring. Waveform matching of the zero-th order symmetric mode Lamb AE waves were attempted to study the fracture dynamics. Crack volumes estimated by the AE waveform simulation was compared with those computed by three dimensional FEM. Fracture mechanisms of toughened silicon nitride under static and cyclic fatigue were discussed in detail. KEYWORDS Silicon nitride, Static fatigue, Cyclic fatigue, Weibull distribution, Fatigue damage, Acoustic emission, Waveform matching, Fracture Mechanism INTRODUCTION It has been well recognized that sintered silicon nitrides, Si3N4, exhibit both static and cyclic fatigue behaviour [1]. Since the fatigue strength generally shows a large scatter, it should be evaluated by a statistical expression of S-N curve, namely P-S-N curve. However, the statistical evaluation requires a timeconsuming and expensive work. One of the authors proposed a simple method to evaluate the fatigue strength statically under a mechanical condition where driving force for fracture is gradually increased [2]. This technique enabled us to study the statistic characteristics of fatigue strength and contribution of fatigue damage with respect to the testing conditions. Mechanism of the fatigue damage of toughened silicon nitride is be caused by initiation and growth of small cracks [3]. However, the conventional optical observation is extremely difficult because crack initiation site is hardly predicted. Source location method of AE signals enables the estimation of crack initiation position. Further, the inverse processing or waveform simulation can study the fracture dynamics such as crack nucleation time, ∆Tr, and crack volume, ∆V [4], and supply us with information of damage mechanism. In the present study, both static and cyclic fatigue strength of toughened Si3N4 was studied utilizing new-type loading procedure and AE waveform simulation to monitor the behaviour of small cracks in the ceramic.
RkJQdWJsaXNoZXIy MjM0NDE=