Dwells produce a reduction in fatigue life when compared to the continuous cycling case. Figure 4 shows the load drop as a function of number of cycles for a dwell of 100s at the maximum tensile strain. Cycles containing balanced dwells are the most deleterious. Table 3 shows the number of cycles to failure for continuous cycling and for cycles containing dwell periods at 1percent strain range. These results follow a similar trend although at the lower temperature a dwell during the tensile cycle is the most damaging. The sensitivity to dwells, as defined by the Influence Ratio, which is the ratio of fatigue lives with and without dwells, is shown in figure 5. The Sn-0.5 Cu alloy is more resistant to short (10s) hold periods in the cycle but this superiority disappears when the dwell is extended to 100s. Apart from the short dwells for the Sn-0.5Cu, all other cycle profiles produced a deleterious effect on life. 0 0.05 0.1 0.15 0.2 0.25 0 200 400 600 800 1000 1200 Sn/Ag RT Sn/Cu RT Pb/Sn 75C Sn/Ag 75C Sn/Cu 75C Load drop parameter Number of cycles Figure 4. Load drop parameter v number of cycles with a 100s tensile dwell, 1 percent strain range. 0.1 1 10 10 100 1000 104 Sn/Pb RT Sn/Pb 75 Sn/Ag RT Sn/Ag 75 Sn/Cu RT Sn/Cu 75 Total strain range Number of cycles to 20 percent load reduction Figure 3. Cofin-Manson plot of total strain v number of cycles to 20 percent load reduction. TABLE 3 EFFECT OF DWELLS ON FATIGUE LIFE AT 75˚C AND ROOM TEMPERATURE (IN ITALICS) DURING DWELLS OF 10 AND 100 SECONDS. Cyclic shape zero dwell 0/0 10s dwell 100s dwell Pb/Sn 550 / 1030 t/0 460 / 415 125 / 150 0/t 560 / 550 300 / 340 t/t 300 / 435 120 / 282 Sn/Ag 800 / 1400 t/0 400 /1400 500 / 1000 0/t 450 / 700 180 / 1000 t/t 700 / 500 145 / 550 Sn/Cu 320 / 600 t/0 450 / 750 240 / 325 0/t 350 / 1400 100 / 250 t/t 200 / 300 70 / 350 3.5 Microstructure In Sn-Pb, cracking around colony boundaries became more extensive at higher strain ranges and cycles with incorporated dwell periods. Figures 6(a) and 6(b) compares this cracking in Sn-Pb and Sn-Cu
RkJQdWJsaXNoZXIy MjM0NDE=