existed for many years, however, their direct application to the spinning tire in the open peer reviewed literature is amazingly scarce. In this paper we examine the extension of Steinmann’s method [16, 17] for finite deformation elasticity to the case of an elastic spinning tire in steady rotation. Analysis in a steady spinning frame of reference is based upon the early work of Lynch [12] and the basic equations for such an analysis in finite deformation were first presented by Oden and Lin [13]; more recently see the discussions of LeTallec and Rahier [10] and Govindjee and Mihalic [5]. ENERGY RELEASE RATE The issue of an energy release rate computation comes down to the computation of the following expression: GA = lim →0Z Γ( ) Σo ABNo BdΓ( ), (1) whereΣo AB =W(F o)δ AB−Fo iAPo iB is Eshelby’s energy-momentum tensor, Wis the strain energy density, Fo iA is the deformation gradient, and Po iA is the first Piola-Kirchhoff stress tensor. The surface Γ( ) with normal No A surrounds the crack tip and is of radius . The result GA is the crack tip driving force or energy release rate. Note that the result is zero unless the integrand is singular. Steinmann’s method is based on the subtle observation that this quantity is in fact closely related to the “external work” terms in the weak form of the balance equation for the energy-momentum field. In the above and throughout we employ indicial notation with lower case Latin indices for the spatial frame and upper case Latin indices for the reference frame. The superscript o indicates quantities that are associated with the usual continuum mechanics definitions which are expressed in terms of a spatial and referential frame. Later on we will employ greek indices for quantities expressed in a rotating frame and also introduce transformed counterparts to our usual continuum mechanics machinery; these will appear with the same symbols modulo the superscript o. STRONG FORM OF ENERGY-MOMENTUM BALANCE The starting point for exploiting the observation of [16, 17] is to look at the governing balance equation for the energy-momentum tensor which can be expressed as: Σo BA,A−F o iBBo i =−F o iB¯ρ ¨φo i . (2) In the above, Bo i represents any body forces (per unit reference volume), ¯ρ the reference density of the body, and φo i is the deformation (motion) map. The relation follows directly from linear momentum balance and an assumption on the smoothness of the motion. In what follows we will assume that Bo i = 0 since the only direct body forces in the tire are gravitational and these can be safely neglected. WEAK FORM OF ENERGY-MOMENTUM BALANCE The weak form of this relation can be expressed with the aid of an arbitrary test function vB and integration over the reference configuration of the body denoted as B. After integrating by parts one has that ZB vB,AΣo BA−Z B vBF o iB¯ρ ¨φo i =Z ∂B vBΣo BANo A. (3)
RkJQdWJsaXNoZXIy MjM0NDE=