ICF10B

[5] S. Govindjee and P.A. Mihalic, Viscoelastic constitutive relations for the steady spinning of a cylinder, Tech. Report UCB/SEMM-98/02, University of California Berkeley, Department of Civil Engineering, 1998. [6] A.A. Griffith, The phenomena of rupture and flow in solids, Philosophical Transactions of the Royal Society of London 221A(1920), 163–197. [7] C.E. Ingles, Stresses in a plate due to the presence of cracks and sharp corners, Transactions of the Institute of Naval Architects 55 (1913), 219–241. [8] G.R. Irwin, Fracture dynamics, pp. 147–166, American Society for Metals, 1948. [9] K. Kishimoto, S. Aoki, and M. Sakata, Dynamic stress intensity factors using ˆj-integral and finite element method, Engineering Fracture Mechanics 13 (1980), 387–394. [10] P. Le Tallec and C. Rahier, Numerical models of steady rolling for non-linear viscoelastic structures in finite deformations, International Journal for Numerical Methods in Engineering 37 (1994), 1159–1186. [11] F.Z. Li, C.F. Shih, and A. Needleman, A comparison of methods for calculating energy release rates, Engineering Fracture Mechanics 21 (1985), 405–421. [12] F. DE S. Lynch, A finite element method of viscoelastic stress analysis with application to rolling contract problems, International Journal for Numerical Methods in Engineering 1 (1969), 379–394. [13] J.T. Oden and T.L. Lin, On the general rolling contact problem for finite deformations of a viscoelastic cylinder, Computer Methods in Applied Mechanics and Engineering 57 (1986), 297–367. [14] J.R. Rice, A path independent integral and the approximate analysis of strain concentration by notches and cracks, Journal of Applied Mechanics 35 (1968), 379–386. [15] R.S. Rivlin and A.G. Thomas, Rupture of rubber 1. Characteristic energy for tearing, Journal of Polymer Science 10 (1953), 291–318. [16] P. Steinmann, Application of material forces to hyperelastic fracture mechanics. I. Continuum mechanical setting, International Journal of Solids and Structures 37 (2000), 7371–7391. [17] P. Steinmann, D. Ackermann, and F.J. Barth, Application of material forces to hyperelastic fracture mechanics. II. Computational setting, International Journal of Solids and Structures (2001), (to appear). [18] O.C. Zienkiewicz and R.L. Taylor, The finite element method, volume 1, 5 ed., Butterworth and Heinemann, 2000.

RkJQdWJsaXNoZXIy MjM0NDE=