MATHEMATICAL MODEL Due to the intimately coupled process between the crack width-dependent fluid flow and the herewith pressure induced alteration of this flow-section as response of the structure (as shown in Figure 1), both fluid mechanics and structural mechanics principles have to be observed. Simultaneously, the stress development at the crack front has to be considered under the aspects of fracture mechanics methods. a) b) rf KI p(r,t) ka w(r,t) r R r0 p(x,t) ka w(x,t) x L Grout ρ, µ, C Matrix: Concrete Rock E, ν Kc Figure 1: Scheme of the fluid-structure interaction process a) penny shaped crack b) wedge shaped crack Fluid Mechanics Formulation The physical description of fluid flow is based on the fundamental conservation principles – conservation of mass, momentum and energy, constitutive relationships and equations of state [7]. Disregarding the energy principle (which is not relevant for the present case), the characteristic equations for the conservation of mass and momentum are given by Eqn. 1 and Eqn. 2 (Cauchy equation of motion) respectively. (1) u ⋅ D = 0 + t D ρ∇ ρ Du (2) ρ ρ Dt f p = − ∇ + ∇⋅ τ with ρ as the density of the fluid, u the velocity vector, ∇⋅u the divergence of the velocity, f the body force, ∇p the pressure gradient and ∇⋅τ the divergence of the surface forces (viscous stresses). D/Dt is the substantial derivative, representative for the Eulerian framework. The constitutive relationship for a Newtonian fluid in the formulation of Stokes is shown in Eqn. 3, (3) τ µ 3 = γ− ∇⋅ 2 1 u where µ is the dynamic molecular viscosity and γ is the strain rate tensor. Postulating an incompressible fluid, the second term in the parenthesis of Eqn. 3 is equal to zero and the strain tensor τ then reads: (4) ( ) [ ] = ∇ + ∇ 1 2 u u t τ µ
RkJQdWJsaXNoZXIy MjM0NDE=