ICF10B

; f f(E,K , ) E b bf 1 f ~ dt d Ic 1 2 1 1/ 4 3/ 4 1 σ = η  =      ϑ − ϑ ∗ ∗ l l l (7) where η is the ice cover viscosity, ϑ* is the threshold rate of the fault surfaces displacement characterized by compensation of a mean stress σ by hydrodynamic resistance. Local instability is inherent for a small size of the fault, while fault growth arrest is related to its large size. Hence a necessary condition of a structural element formation is fulfilled. A sufficient condition occurs when the resulting stress in the vicinity of the fault tip becomes equal to the stress of new fault nucleation such that the size of a nucleous fault provides its growth with a larger velocity according to (7) than for the initial fault. One can show that the energy dissipation rate for an echelon of large size faults is larger than for a single fault of the same total length. As a result structure formation becomes the leading process at preparing large scale fracture in the conditions close to the limit equilibrium. A possible role of structure formation in rocks was analyzed in [11] in case of preparing when the local instability is provided by the gas pressure in pores, while the arrest mechanism by the rock pressure. A similar scheme of fracture characterized by formation of a system of microcracks under the action of the hydrogen diffusion is observed at the cracking of pipeline steels modeled in [15]. Basic and conjugate structures Basic structures forming mechanisms of fracture at the initial stage of the medium deformation are of particular importance in the scheme of multiscale fracture. It seems that in the fragment of the hierarchy of structures which can be observed [8-10], the fracture structures play a leading role only within a limited range of scales, within the limits of the influence of certain basic structures. Note, that small perturbations of physical fields are important for occuring a basic structure in a quasihomogeneous body. One can show [11] that the interaction between the elements of this structure is implemented by means of long-range perturbations of stress fields. The transformation of the basic structure into a higher-rank structure is not the only possible response of the medium to an input influence. Experiments with rocks and model media subjected to a quasistatic deformation reveal the process of combined change of the rank with respect to the initial block structure. This process involves the agglomeration of some blocks (formation of a structure of rank i + 1) combined with the refinement of other blocks (formation of a structure of rank i - 1). This combined initiation of structures of rank i ± 1 can be activated by the mechanism of deceleration of the SE of rank i + 1 consisting of several elements of rank i in the effective medium determined by the basic structure of rank i. Additional stresses (stress concentration) in the vicinity of the growing element of rank i +1 can transfer some elements of rank i to the critical state, which leads to the local fracture of these elements and, hence, to a reduction in the rank of the structure. This, in turn, changes the boundary conditions on the scale of the growing element of rank i + 1, leading, in particular, to a stop of the element of rank i and initiation of the development of the neighboring structural element of rank i + 1. Note, that in this scenario of the development of the structures, the structure of rank i - 1 do not influence all elements of rank i and, hence, is not global for the medium subjected to a loading. The scheme of development of the structures just described cover three hierarchical levels. The further extension of the hierarchical systems of structures of fracture to cover all ranks can be implemented as a repetition of the three-stage procedure of formation of the hierarchical blocks. In each of these blocks, the basic structures for the formation of structures of higher ranks (i.e., the structures of rank i + 2, i + 3, etc.) have a rank which is lower by unity then the rank of the structure to be formed. The lower the rank, the less the volume covered by the local fracture process. The development of the process in accordance with such a scheme implies an increasing differentiation of the stress fields and geometrical parameters in the structures of the hierarchical system. This is due to the selective nature of the rank decreasing processes in space and also due to the fact that if the rank increases beyond level i + 1, the role of the lower rank structures in the three-stage hierarchical blocks,

RkJQdWJsaXNoZXIy MjM0NDE=