ORAL REFERENCE:ICF100266OR FORMATION OF TiO2 THIN FILM BY ION-BEAM-MIXING METHOD AND ITS APPLICATION AS THE CORROSION PROTECTING FILM Yuji KIMURA1 and Hirotsugu SAITO1 1 Dept. of Materials Science and Technology, Kogakuin University, Nishishinjuku, Shinjuku-ku, Tokyo 163-8677, Japan kimura@cc.kogakuin.ac.jp ABSTRACT One of the n-type semiconductor materials of TiO2 has been expected to be used as photo-catalytic media in these days. A lot of studies have been conducted for applying TiO2 film to anti-bacterium, water decomposing, anti-stain and deodorant coatings. The TiO2’s photo-catalytic function can be obtained under the condition of UV light illumination. Purpose of this study is to apply coated TiO2 thin film as the corrosion protecting film of substrate metals using photocurrent obtained from UV ray irradiation. This implies the cathodic protection employing outer electric source. Therefore, even though when the thin film having some defect distribution in itself, the TiO2 thin film shows corrosion protecting effects to substrate without a anodic dissolution of film itself. In this paper, formation and characterization of TiO2 thin film made on AISI 304 stainless steel by Ion-Beam-Mixing method were conducted. Then, the cathodic protection performance of 0.15μm thick TiO2 thin film with some defect distribution was investigated in 0.3wt% NaCl aqueous solution. And also, effects of ion source upon the photo-catalytic function of TiO2 thin film was investigated. KEYWORDS TiO2 thin film, Ion-Beam-mixing Method, photo-catalytic function, corrosion protecting film, UV ray irradiation, defect distribution, cathodic protection performance INTRODUCTION Thin film coatings toward various types of materials such as metal and organic compound have been used for protecting substrate surface from harsh environment or adding a lot of functions to them [1]. However, nanometric defects and cracks were always existed in coated thin film from the initial stage [2]. In actual environment, degradation was generated as a result of the corrosive solution coming into substrate metals through the nanometric defect of coating. Recently, one of the n-type semiconductor materials of TiO2 has been expected to be used as photo-catalytic media.
RkJQdWJsaXNoZXIy MjM0NDE=