ICF10B

Figure 6:Polarization curves of TiO2 film under UV ray irradiating condition -500 0 500 1000 10-4 10-3 10-2 10-1 100 101 Electrode potential (mV vs SCE) Current density (A/m2) SUS304 None difect With difect With Defect AISI 304 Figure 8:Pitting corrosion recognized after Figure 7:Polarization curves of TiO2 films under the dark polarization measurement . CONCLUSIONS In this study, formation and characterization of TiO2 thin film made on AISI 304 stainless steel by Ion-Beam-Mixing method were conducted. Then, the cathodic protection performance of 0.15μm thick TiO2 thin film with some artificially scratched defect was investigated in 0.3wt% NaCl aqueous solution. And also, effects of ion source upon the photo-catalytic function of TiO2 thin film was investigated. The results of obtained were summarized as follows: 1. TiO2 thin films made by Ion-Beam Mixing method shows the cathodic protection performance due to its photo-catalytic effect even when TiO2 thin film has some inherent defect distribution in itself. 2. 0.15μm thick TiO2 thin films shows the cathodic protection performance under UV ray irradiating condition in 0.3% NaCl aqueous solution of 298K even when it has artificially scratched defect whose width was about 200 μm. This research was supported by Grant-In-Aid for Scientific Research (B) (1999-2000) (Project No.11450048), The Ministry of Education, Science, Spots and Culture, Japan. REFERENCES 1. Fujishima, A. et.al.(1984). In : Electrochemical Measurement II, Gihodo, Chapter 16. 2. Ohata, M. and Kimura, Y.(2000), Proc. of ECF13, CD Volume, Environmentally assisted cracking, Paper No.2, pp.1-8. 3. Uhlig,H.H.(1971). In : Corrosion and corrosion control, John Wiley & Sons, Chapter 12. 4. Fujisawa, R. and Tsujikawa, S.(1994) Corrosion Engineering, 43, pp.500-504. 5. Tsujikawa, S., et.al.,(1994) Corrosion Engineering, 43, pp.482-486.

RkJQdWJsaXNoZXIy MjM0NDE=