ORAL REFERENCE: ICF100663OR Fractal and Fracture Mechanics Analyses on Fatigue Fracture Surfaces of Metallic Materials Takashi SAKAI 1, Tatsuo SAKAI 2 and Akira UENO 3 1 Department of Mechanical Engineering, Osaka Institute of Technology 5-16-1 Omiya, Asahi-ku, Osaka, 535-8585 JAPAN 2 Faculty of Science and Engineering, Ritsumeikan University 1-1-1 Nojihigashi, Kusatsu, Shiga, 525-8577 JAPAN 3 Department of Mechanical System Engineering, Toyota Institute of Technology 2-12-1 Hisakata, Tempaku-ku, Nagoya, Aichi, 468-8511 JAPAN ABSTRACT In this study, fatigue crack propagation tests were carried out to obtain the fatigue fracture surfaces on compact tension type specimens of A5052 aluminum alloy and S25C carbon steel, and the fatigue fracture surfaces were observed by means of a scanning laser microscope system. Based on the digital data thus obtained, imaginary fracture surface was reconstructed in a 3-dimensional space by a personal computer. Fractal analysis proposed by B. B. Mandelbrot was applied to such 3-dimensional surfaces and a hyperbola model was accepted to represent the Richardson effect. Due to the Richardson effect thus analysed, the fractal feature was confirmed in the fracture surface irregularity. It was finally found that the geometrical irregularity of the surface was well evaluated by combining the fractal dimension and additional indices termed as “index of fracture surface nature”, and that the fractal dimension and the additional indices were successfully connected to the stress intensity factor range of ΔK. KEYWORDS Fractal, Richardson Effect, Self-similarity, Fatigue Fracture Surface, Surface Irregularity, Fractography, Fracture Mechanics, SLM Observation 1. INTRODUCTION In order to analyse the irregularity of shapes and time-dependent phenomena, various methods such as Fourier analysis and some conventional procedures as stochastic process have been developed and used by many researchers. A concept of fractal proposed by B. B. Mandelbrot [1] is useful to quantify the above irregularity and this has been successfully applied to various fields in both science and technology [2-5]. On the other hand, several kinds of high resolution microscopes such as SLM (Scanning Laser Microscope), STM (Scanning Tunnel Microscope) and AFM (Atomic Force Microscope) have been used in recent years to observe the nature of the fracture surface in a 3-dimensional space. However, definite procedures to quantify the irregularity of the fracture surfaces have not been established yet. As reported in the earlier papers [6, 7], we proposed a new analytical method to quantify the surface irregularity applying the concept of fractal, and the surface irregularity of the tensile fracture surfaces and the mechanically finished surfaces was successfully evaluated by using this method. In the present study, this method is modified and expanded to analyse the surface irregularity of the fatigue fracture surfaces. Moreover, particular attention is paid here to investigate the relationship between the surface irregularity
RkJQdWJsaXNoZXIy MjM0NDE=