and the fracture mechanics parameter of ΔK. 2. SPECIMENS AND FATIGUE CRACK PROPAGATION TESTS 2.1 Specimens and Fatigue Crack Propagation Behavior Materials used in this study are A5052 aluminum alloy and S25C carbon steel in JIS material codes. Mechanical properties of these materials obtained by tensile tests are listed in Table 1. Fatigue crack propagation tests were performed by a hydraulic servo fatigue testing machine to obtain the fatigue fracture surfaces on compact tension type specimen [8, 9] standardized in ASTM. The frequency was fixed to 50Hz, and two different stress ratios of R=0.1 and 0.5 were selected. Fatigue fracture surfaces were observed by means of a SLM system explained in other papers [10, 11], whereas the fatigue crack propagation was observed by an optical microscope with the resolution of ×100. Based on the crack propagation behavior thus observed, relationships between the stress intensity factor range ΔK and the crack growth rate da/dN are plotted as shown in Figure 1. It should be noted that only one specimen was assigned to each series of the fatigue crack propagation test. In this figure, each solid line is determined as to provide the least squares for the respective data points. It is confirmed that the fatigue crack propagation behavior is well represented by the following expression [12]; ( )m C K dN da ∆ = , (1) where ( ) × α ∆ ∆ f BW P K 2 1 = , (2) ( ) ( )( ) ( )2 3 4 3 2 1 5.6 14.72 2 0.886 4.64 13.32 −α +α + α− α+ α−α α= f , (3) Table 1: Mechanical properties of materials Figure 1: Relationships between stress intensity factor range ΔK and crack growth rate da/dN * : not satisfied Eqn.(4). A5052 - 225 268 19.8 43.4 S25C 333 - 506 35.5 59.8 Reduction of area φ (%) Material Yield stress σ y (MPa) 0.2% Proof stress σ 0.2 (MPa) Tensile strength σ B (MPa) Elongation δ (%) 5 10 50 10-7 10-6 Stress intensity factor ΔK (MPa m) Crack growth rate da/dN (m/cycle) √ 1 2 3 4 5 6 7 8 9 10 11 12 * * * * * * * * * * Pmax=9.8kN Pmax=16.3kN Pmax=9.8kN Pmax=4.9kN R=0.1 R=0.5 A5052 △ ▲ S25C ○ ●
RkJQdWJsaXNoZXIy MjM0NDE=