ORAL/POSTER REFERENCE: ICF100925PR FRACTOGRAPHIC ANALYSIS OF FISH-EYE TYPE FATIGUE CRACK IN TWO KINDS OF HIGH STRENGTH STEELS KANAME MORI AKIRA UCHIYAMA YOSHIKAZU YAMADA Department of Materials Science Engineering, School of Science and Engineering, Teikyo University, 1-1 Toyosatodai, Utsunomiya, 320-8551, Japan ABSTRACT In order to clarify the influence of the surface treatment on the fatigue behavior of two high strength steels in long life region, cantilever type rotating bending fatigue tests have been carried out by using the specimen to which three kinds of surface treatments were finally performed. The surface treatments tested were grinding, polishing and shot-peening. Many fish-eye type fracture surfaces in long life region were observed in detail using SEM, EDS, and optical microscopy. Two kinds of inclusions were found often in the fatigue crack initiation site of fish-eye cracking. One is alumina for a low alloy steel, another nitride titanium for a bearing steel. Based on the testing conditions, the distance to crack initiation site, the size of inclusions and the size of fish-eye feature, the fish-eye type fatigue initiation behaviors under the condition of three different surface treatments were analyzed using the method of Fracture Mechanics. KEYWORDS fatigue, long life, fractography, surface treatment, shot-peening, fish-eye, crack initiation, inclusion INTRODUCTION There are a lot of data [1,2,3] on the influence of the surface treatment on fatigue strength of steels in the range up to ten million cycles. Recently, some important researches [4,5,6,7,8,9] that fatigue strength decreases in high cycle range, which exceeds ten million cycles for several steels, are reported. The purpose of this study is to clarify the influence of the surface treatment on the fatigue behavior of the high strength steel in high cycle region. The fatigue crack initiation behaviors of two kinds of high strength steels were investigated by using the specimens with three different surface treatments. Especially, fish-eye type fracture images at subsurface fatigue crack initiation site were observed in detail using SEM, EDS and optical microscopy to search for the mechanism of fatigue fracture. EXPERIMENTALPROCEDURE 1
RkJQdWJsaXNoZXIy MjM0NDE=