found as a dark area. Y. Murakami et al. [10,11] call this region optical dark area (ODA). Figure 3 (b) is the scanning electron microscope image of the same fish-eye in Fig. 3 (a). The area corresponding to ODAin Fig. 3 (a) is observed in the fatigue crack origin in Fig.3 (b). In this paper, we call this region in Fig.3 (b) granular area (GA). Figure 4 shows the inclusion observed at the origin of fish-eye cracking on the specimen finally polished by 1500 mesh emery paper in low alloy steel. Figures 4 (a) and (b) show the mating fracture surface images. The image shown in (a) was printed inside out for the convenience of the comparison. Figure 4 (c) shows the Al Kα dot map of the inclusion in (b). It was presumed that this inclusion was an alumina in addition to the information on the shape and size [3,12]., which was grainy and hexagonal. It is a little vague, but GA was also observed in surrounding of the inclusion. Figure 5 is an unusual observation example in low alloy steel. The inclusion, which was the nucleus of the fish-eye, was presumed as nitride titanium, because of the EDS image, the angular shape and size [3,12]. In this case, GA was remarkably developed in surrounding of the inclusion. Figures 6 and 7 show the typical inclusions observed at the origin of fish-eye cracking in bearing steel. It was presumed that these inclusions were nitride titanium based on the information of the EDS image, the angular shape and size [3,12]. In Fig.6, GA is hardly observed in surrounding of the inclusion. In Fig.7, GA is remarkably developed in surrounding of the inclusion. The detailed observation results of the fatigue fracture origin are summarized as follows. The inclusions observed at the origin of fatigue fracture depend on the kinds of steels. Thirteen examples were alumina in the low 4
RkJQdWJsaXNoZXIy MjM0NDE=