ICF10B

ICF100475OR Fracture behavior of conductive cracks in PZT-4 piezoelectric ceramics Tian-Hong Wang, Ran Fu and Tong-Yi Zhang* Department of Mechanical Engineering Hong Kong University of Science and Technology Clear Water Bay, Kowloon, Hong Kong, China ABSTRACT The present work experimentally investigates the fracture behavior of conductive cracks in PZT-4 piezoelectric ceramics by using compact specimens under combined electrical and mechanical loading. Finite element calculations were conducted to obtain the energy release rate, the stress intensity factor and the intensity factor of electric field strength of the specimens. The results show that the critical energy release rate under purely either electric or mechanical load is a constant, independent of the ligament length. However, the critical energy release rate under combined electrical and mechanical loading depends on the weight of the electrical load in comparison with the mechanical load. We normalize the critical stress intensity factor by the critical stress intensity factor under purely mechanical loading and normalize the critical intensity factor of electric field strength by the critical intensity factor of electric field strength under purely electric loading. Then, a quadratic function describes the relationship between the normalized critical stress intensity factor and the normalized critical intensity factor of electric field strength, which can serve as a failure criterion of conductive cracks in piezoelectric ceramics. KEYWORDS piezoelectric ceramics, intensity factor, energy release rate, combined electrical and mechanical loading. INTRODUCTION Piezoelectric ceramics are one kind of smart materials widely used in high-tech industries, such as sonar transducers, electromechanical actuators, controlling devices and smart structures etc. due to their high piezoelectricity, permittivity and pyroelectricity as well as the merit of easy processing and low cost. However, piezoelectric ceramics are essentially brittle and susceptible to cracking at all scales from domains to devices. Therefore, the reliability and integrity of such devices and structures made of piezoelectric ceramics have recently attracted increasing interest from both academics and industrialists. There are voluminous theoretical studies on fracture of piezoelectric materials, and more and more increasing experimental results in the literature. Recently, Zhang et al. [1] gave an overview about the advances in fracture of piezoelectric ceramics, involving extensively theoretical and experimental studies. * Corresponding author, E-mail: mezhangt@ust.hk

RkJQdWJsaXNoZXIy MjM0NDE=