FRACTURE BEHAVIOUR OF A FIBRE-BRIDGED CRACK Hong-Yuan Liu 1, Xi Zhang 2, and Yiu-Wing Mai1,3 1 Centre for Advanced Materials Technology, School of Aerospace, Mechanical and Mechatronic Engineering, The University of Sydney, Sydney, NSW 2006, Australia 2 CSIRO Petroleum, PO Box 3000, Glen Waverley, VIC 3150, Australia 3 MEEM, City University of Hong Kong, 83 Tat Chee Avenue, Kowloon, Hong Kong ABSTRACT The effects of interfacial debonding and sliding on the fracture characterisation of unidirectional fibrereinforced composites are studied numerically under small-scale bridging conditions in plane strain. The cohesive zone, more commonly called the fracture process zone (FPZ), is characterised by matrix separation and individual fibre pullout. A bi-linear stress-displacement fibre-bridging law is incorporated into the computational model to account for interfacial debonding and sliding and fibre breakage, instead of the line-spring model in which the fibres remain intact. The matrix fracture process is described by a linear stress-displacement cohesive law. Anisotropic elastic constitutive relations are used for the effective properties of the brittle-matrix composite outside the FPZ. A remote boundary condition is also imposed in terms of the elastic solutions for a mode I crack. Crack advance and fibre breakage are direct consequences of the constitutive modelling without any ad hoc crack growth criterion. Numerical implementation of the finite element method with the embedded cohesive zone containing fibre bridging and matrix fracture is elucidated. Fracture resistance (R)-curve is obtained for a range of conditions to highlight the debonding and frictional behaviours at the fibrematrix interface. It is shown that the fracture toughness can be enhanced by optimisation of the fibrematrix interfacial properties. Numerical results also show that fibre breakage plays an important role on the reduction of the slope of the R-curve. KEYWORDS Cohesive zone, Fibre-bridging, Matrix cracking, Interface behaviour, (R)-curve, Finite element method, Fibre pullout, Fibre breakage INTRODUCTION In fibre-reinforced composites, the interaction of a fibre with the matrix is of great interest for failure assessment. Interfacial debonding and frictional sliding associated with the fibre pullout process are regarded as two important mechanisms to increase the toughness of unidirectional fibre-reinforced composites. In general, a cell model for a single fibre pullout test is used to evaluate the relationship between pullout force and pullout displacement. The fibre pullout force-displacement curves obtained provide a good approximation of the crack-face bridging law in the wake region [1-3]. Various approximation methods with regard to the bridged-crack have been developed. Aveston, et al
RkJQdWJsaXNoZXIy MjM0NDE=