Figure 7: Foto of arrested cracks at edges of segments in composite plates CONCLUSIONS Although the brittle nature of glass cannot be changed some toughness can be build into laminated composite glass structures by new methods of lamination. Using a thin ductile polymer interlayer bonded to the glass cracks in the glass can be arrested by stretching of the polymer interlayer in the crack wake. In addition this provides crack bridging. This stretching can only occur if the adhesive delaminates locally, distributing the strain in the polymer over a greater volume. A brittle and strong adhesive that can be applied in a thin layer is required for this. If the adhesive is too strong or the layer is too thick the mechanism does not work because the strains are not properly distributed to the polymer interlayer resulting in failure of the interlayer of failure of the laminate. Using this method of obtaining crack arrest and crack bridging transparent composite beams and plates can be made with mechanical properties similar to some aluminium alloys. Although considerable work is yet required to produce a real engineering material the concept provides the basis for an unique material combining transparency with the ability to safely carry loads. Patent for the various developments is being applied for. ACKNOWLEDGEMENTS The assistance of the “van Noordenne groep”, in providing us with glass and technical expertise is acknowledged. The assistance of “Siko BV”, in providing bonding agents, equipment and technical expertise, is acknowledged REFERENCES 1 I.W. Donals et al. , The mechanical properties and fracture behaviour of some chemically strengthened silicate and borate glasses, Glass technology vol 34, p 114, 1993 2 G. Weidman et al. Structural materials, Butterworth Heineman, 1990
RkJQdWJsaXNoZXIy MjM0NDE=