TABLE 3 FRACTURE RESULTS FROM CCAL SPECIMENS MK (%) Kc (MN/m3/2) Gc N/m Ef N/m Tf 28 day tests 0 5 10 15 0.85 1.01 1.18 1.37 19.8 26.5 35.2 45.1 46.8 67.2 70.7 97.4 2.34 2.54 2.01 2.16 91 day tests 0 5 10 15 1.01 1.11 1.13 1.21 27.2 32.0 31.4 35.1 65.0 71.9 78.8 77.5 2.39 2.25 2.51 2.21 FRACTURE SURFACE TORTUOSITY The fracture energy Ef is evaluated on the basis of the area of the ligament between the two notches. This overestimates Ef by a factor related to the tortuosity of the newly created surface. A tortuosity, or roughness, factor can be estimated as the ratio of the true surface area to the projected area. This definition was used by Wollrab et al [14] during tensile testing of edge notched specimens. In this paper the tortuosity is estimated by a factor Tf (Tables 2 and 3) given by the ratio of Ef to Gc, as evaluated from Eqns. 1 and 2. It is seen that in general significant decrease in Tf results with increasing MK content. This is a clear indication that the addition of MK results in smoother fracture surfaces. This is largely attributed to the filler effects of MK, which alter the matrix structure of the concrete. The porosity of the matrix in the region of the interfacial zone reduces resulting in a denser and more homogeneous transition zone [15]. Because the interfacial zone is the ‘weak link’ within the concrete, the inclusion of MK results in a more effective composite action with a greater role being played by the coarse aggregate in controlling the fracture path. Whereas in normal concrete crack growth usually takes a path around the aggregates, in the case of MK concrete and because of the reduction in the thickness of the interfacial zone the growth proceeds through the aggregates resulting in smoother fracture surface. This phenomenon was very clear on inspection of the actual fracture surfaces of the specimens at fracture. CONCLUSIONS The work presented in this paper demonstrated the effectiveness of two testing systems in assessing the changes in the fracture properties of concrete due to the incorporation of metakaolin. The tests employ compact specimens that are easy to manufacture and simple to handle. Significant increases in the fracture toughness and fracture energy results by the incorporation of up to 15% metakaolin. These increases, which surpass those usually obtained for the compressive strength, are attributed to the filler effects and pozzolanic activity of the metakaolin. Improved composite action between the cement paste and the aggregates is obtained resulting in smoother fracture surfaces, which are confirmed by the significant reductions in the tortuosity factors.
RkJQdWJsaXNoZXIy MjM0NDE=