simplified finite element model using shell and beam elements. It can be seen that there is a significant improvement in prediction capability when the post yield analyses are performed based on the stress analyses when critical fastener parameters are considered. 0 100 200 300 400 500 600 Smax, MPa 1E+5 1E+6 1E+7 1E+8 Cycles As-welded specimens, SP3 spectrum Initial RS No RS RS relaxation Tests 0 100 200 300 400 Smax, MPa 1E+5 1E+6 1E+7 1E+8 1E+9 Cycles TIG-dressed specimens, SP3 spectrum RS relaxation No RS Initial RS Tests (a) (b) Fig.8: Comparison of conventional and post-yield fatigue life analyses for as-welded and TIG-dressing condition for cruciform specimens. Different load levels -500 -250 0 250 500 0 0.01 0.02 0.03 0.04 Strain Stress, MPa 80 MPa 100 MPa 120 MPa (a) (b) Fig.9: Shakedown condition at a rivet fastener joint for various load levels. CONCLUSIONS The consideration of post yield fatigue is necessary for complicate structural details that may involve plastic yielding under fatigue loading. Without the consideration, it is very difficult to evaluate fatigue problems based on fracture mechanics methods. Under the elastic shakedown condition, a strip yield crack closure model is extended to solve the fatigue problems due to its capability of dealing with load interaction and small crack growth problems. The model is based on the non-linear finite element analyses when cracks are not involved. Extension of the model to the post yield problems is demonstrated and verified with the nonlinear finite element solutions. Several practical problems are presented to illustrate the solution and to verify its effectiveness. It is shown that with the correct solution, significant improvements, in at least one order of magnitude, may be achieved in evaluating fatigue life based on the fracture mechanics method even when gross local yielding has occurred. The method is significant in helping to understand fatigue behaviours in complex structural details when local yield occurs, and in promoting the fracture mechanics method into a much wider area of crack growth problems.
RkJQdWJsaXNoZXIy MjM0NDE=