ICF10B

making this coating has been transferred to the U.S. Navy and an approved supplier. A military specification has been issued and this coating is being deposited on a number of ship and submarine components for service evaluation. This paper describes the microstructural features that give rise to the improved toughness of the coating. EXPERIMENTAL RESULTS Crack growth resistance, or pseudo-toughness, measurements were made using a Vickers hardness tester with a 3kg load, and measuring the crack length emerging from the indent corners. The crack growth resistance is defined as the reciprocal of the crack length. 0 2 4 6 8 10 12 14 290 320 350 380 410 440 CPSP Crack Growth Resistance (1000 x µm-1) Figure 1. Crack growth resistance as a function of CPSP for Metco 130 coatings ( ) and nanocoatings ( ). (a) 50 µm (b) 15 µm Figure 2. Microstructure and crack characteristics of Metco 130 coatings. Figure 1 shows the crack growth resistance of the nanostructured alumina-13w/o titania coatings and that of the commercial Metco 130 coating of the same composition. The data is plotted against the critical plasma spray parameter, CPSP, that is a function of flame

RkJQdWJsaXNoZXIy MjM0NDE=