ICF10B

0 10 20 30 40 50 60 70 80 CPSP Percentage of Microstructure Features that Stop the Crack (%) 300 325 350 390 410 Porosity PM region FM region Boundary Figure 5. Percentage of microstructure features in the nano alumina-titania coatings that stop the crack as a function of CPSP. Porosity in the microstructure plays a larger role as the CPSP is reduced. However, for CPSP’s less than 350, the porosity level is high (about 10%) because of a high volume fraction of partially melted particles, and this lowers the overall crack growth resistance of these microstructures. SUMMARY AND CONCLUSIONS For the nanostructured alumina-titania coatings, optimized crack growth resistance and toughness were obtained for intermediate levels of CPSP. For these CPSP levels between 350 and 390, the partially melted regions represent 15 to 20% of the bi-modal microstructure and provide optimum toughening from a variety of crack arresting and deflection mechanisms. When CPSP is high; e.g., 410, there are insufficient partially melted regions to provide toughening. When CPSP is low; e.g., <350, the coating has sufficient porosity that the toughness of the microstructure is low. ACKNOWLEDGEMENTS This work was supported under ONR Contract No. N00014-98-C-0100. The vision and support of Dr. Lawrence Kabacoff, ONR Program Administrator, is greatly appreciated. The efforts of Inframat Corporation in plasma spraying the specimens is noteworthy. REFERENCES 1) E. H. Jordan, M. Gell, Y. H. Sohn, D. Goberman, L. Shaw, S. Jiang, M. Wang, T. D. Xiao, Y. Wang and P. Strutt, “Fabrication and Evaluation of Plasma Sprayed

RkJQdWJsaXNoZXIy MjM0NDE=