(a) 0 20 40 60 80 100 0 1020304050607080 specific modulus, E/ρ (GPa/Mg/m3) Vol.% reinforcement s = 2.0 s = 1.0 (b) 0.0 0.2 0.4 0.6 0.8 1.0 0 1020304050607080 relative elongation, εDRA / εmatrix Vol.% reinforcement Fig. 1: Plot showing: (a) specific modulus, and (b) relative elongation vs. volume fraction of reinforcement for different DRA materials[7]. Solid lines are from Eshelby-type models[8], based on reinforcement aspect ratios s = 1.0 and s = 2.0. Broken lines are approximate upper and lower bounds on elongation data. In order to quantify the effects of particle morphology on the tensile properties of the 6061/SiC/25p DRA materials, we required two morphologically different SiC particles. The lower aspect ratio HBD SiC particles used in the present study are produced by a proprietary milling process. The resulting particles have a size distribution similar to the standard abrasive grade F-600 SiC, but with a blocky appearance, Fig. 2. In addition, it is reasonable to conjecture that the HBD particles may have a higher intrinsic strength than the F600 particles, due to their surviving the mechanical milling process. Both these features are attractive in terms of a ceramic reinforcement for DRA. (a) (b) 20 µm 20 µm Fig. 2: SEM micrographs showing morphology of (a) High Bulk Density (HBD), and (b) F-600 SiC1. In each case, mean particle size ≈ 12 µm. 1 "Green" SiC powder, obtained from Saint-Gobain Industrial Ceramics, Inc. Worcester, MA.
RkJQdWJsaXNoZXIy MjM0NDE=