ICF10B

ICF0219 EFFECT OF SURFACE CRACK GEOMETRY ON THE FATIGUE LIFE OF HIGH STRENGTH LOW ALLOY STEEL A. Giassone1,2, F.A. Darwish1, M. V. Pereira1, A. C. Vidal2 and A. R. Martins1,2 1Department of Materials Science and Metallurgy (DCMM), Catholic University of Rio de Janeiro (PUC-Rio), RJ 22453-900, Brazil 2Institute of Technology (ITUC), PUC-Rio ABSTRACT A study has been made concerning the effect of surface crack geometry on the fatigue life of a high strength low alloy steel connecting rod of a high power diesel motor. Connecting rods are usually designed to have “infinite” fatigue life but they may suffer premature failure in the presence of surface cracks which can be nucleated due, for example, to poor maintenance practice. Finite element calculations were carried out to determine the stress levels developed in the rod during its operational cycle. Using the mechanics of surface cracks, a design curve depicting the relationship between the length and depth for nonpropagating cracks was established. The results have indicated that semicircular cracks as small as 1.8mm in length (i.e. 0.9mm radius) are in fact capable of propagating and that fatigue life would drop by about an order of magnitude as the initial crack length was increased from 2 to 8mm. On the other hand, an 8mm long semielliptical crack was shown to be able to propagate only if it had an initial depth of at least 0.3mm. Increasing that initial depth from 0.3 to 2mm the fatigue life would drop by more than two orders of magnitude. KEYWORDS Fatigue limit, Semielliptical cracks, nonpropagating cracks, crack propagation, fatigue life. INTRODUCTION Fatigue fracture can occur in high strength low alloy steel motor connecting rods due to poor maintenance practice. Such practice can promote the nucleation of surface cracks, which may then propagate, leading to fatigue failure of these rods. As they are usually designed to work at stress levels below the materials endurance limit and therefore expected to last “indefinitely”, their premature failure could have serious implications. Accordingly, the prediction of fatigue life in the presence of surface cracks should represent an important task that is closely related to economic as well as safety considerations. Primarily, fatigue life is determined by crack growth kinetics, which for a given loading condition, depends on the initial geometry and dimensions of the propagating crack.

RkJQdWJsaXNoZXIy MjM0NDE=