ICF10B

0 20 40 60 C O SiMn P S Ni CrMoFe ELID ground specimen alumina polished specimen Fig.9 EDX pattern of the ground surface Intensity (atm%) 5. CONCLUSION In the present study, to clarify the effect of surface roughness on corrosion response of type 316 stainless steel, the ELID grinding method was used as the surface finishing process. Two surface finishing processes were evaluated: (1) the ELID grinding method, (2) alumina polishing method. Results are summarized as follows. (1) Excellent smooth surfaces can be achieved by the ELID grinding process when using extremely fine abrasives. The value of surface roughness (Ra) for the ELID ground sample is almost the same as that of the polished sample by using an alumina suspension. (2) The corrosion properties of the ELID ground samples with smooth surface are superior than those of the alumina polished specimen. This is attributed to the ELID grinding, producing a very thin and stable oxide layer which displays a superior corrosion resistance compared to that of the alumina polished samples. REFERENCES (1)H.Ohmori, Journal of the Japna Society for Precision Engineering , 9(1993), 59 (2)H.Ohmori and T.Nakagawa, Annals of CIRP, 44/1, (1995), 287. (3)K.Kyo, Journal of the Society of Grinding Engineers, Vol.43, No.7 (1999), Jul. 321-326. (4)K.Kyo, Journal of the Society of Grinding Engineers, Vol.43, No.11 (1999), Nov. 493-499.

RkJQdWJsaXNoZXIy MjM0NDE=