ICF10B

Direct current potential drop (DCPD) method that is applicable to the fast loading test was used for monitoring crack extension. The tests were conducted on a servo-hydraulic MTS 810 system. To insure signal integrity, the specimen and grip assembly was isolated from the rest of the load train. The details were reported elsewhere [4]. RESULTS AND DISCUSSION Fig. 1 and Fig. 2 shows the J-R curves under various loading rates and temperatures. It was observed that the J-R fracture resistance of SA516-Gr.70 steels was very sensitive to the loading rate and temperature. The fracture resistances of Mat. A were superior to those of Mat.B under every test conditions. 3 3000 0 1 2 3 4 5 0 500 1000 1500 2000 2500 000 SA516-Gr.70 steel 316oC Loading rate : 0.3 mm/min 10 mm/min 1000 mm/min (solid: Mat.A, open: Mat.B) J-Integral, (kJ/m2) Crack Extension, ∆a (mm) 0 1 2 3 4 5 0 500 1000 1500 2000 2500 SA516-Gr.70 steel 177oC Loading rate : 0.3 mm/min 10 mm/min 1000 mm/min (open: Mat. A, solid: Mat. B) J-Integral, (kJ/m2) Crack Extension, ∆a (mm) (a) (b) Fig. 1 : J-R Curves at various loading rates for Mat.A and Mat.B at (a) 177℃ and (b) 316℃. 0 1 2 3 4 5 0 500 1000 1500 2000 2500 3000 SA516-Gr.70 steel-Mat.A Loading rate : 1000mm/min 100oC 177oC 288oC 316oC 400oC 500oC J-Integral, (kJ/m2) Crack Extension, ∆a (mm) 0 1 2 3 4 5 0 500 1000 1500 2000 2500 3000 SA516-Gr.70 steel-Mat.B Crack Extension, ∆a (mm) Loading rate : 1000mm/min 21oC 93o C 177oC 316oC 425oC 500oC (a) (b) Fig. 2 : Variations of J-R curves with test temperature ; (a) Mat.A, (b) Mat.B. J integral values named as J0.1 were obtained at ∆a=0.1 inch (2.54 mm) on J-R curves to appreciate the dependence of the fracture resistance on the temperature and loading rate quantitatively as shown in Fig. 3. - 3 -

RkJQdWJsaXNoZXIy MjM0NDE=