ICF10B

experimentally in specimens of Nicalon-CG and Hi-Nicalon 0/90 woven composites. The transition from nonlinear crack growth kinetics to linear growth kinetics is also reproduced by the model by comparing crack growth rates under FR or IR domination. By implementing a simple “fiber removal” algorithm, where the criterion for removal is based either on a critical oxide thickness or stress rupture threshold, we can also map out transitions between crack growth due to OE and SR. The model is useful in helping us develop and understand crack growth mechanisms and to design improved composite materials. REFERENCES 1. C. H. Henager, Jr. and R. H. Jones, Mater. Sci. Eng., A, 1993, A166 211. 2. C. H. Henager, Jr. and R. H. Jones, J. Am. Ceram. Soc., 1994, 77 2381. 3. C. H. Henager, Jr., R. H. Jones, C. F. Windisch, Jr., M. M. Stackpoole, and R. Bordia, Metall. Mater. Trans. A, 1996, 27A 839. 4. C. A. Lewinsohn, C. H. Henager, Jr., and R. H. Jones, Ceram. Trans., 1999, 96 351. 5. H. Bückner, Z. Angew Math. Mech., 1970, 46 529. 6. J. R. Rice, Int. J. Solids Struct., 1972, 8 751. 7. T. Fett, C. Mattheck, and D. Munz, Engr. Fract. Mech., 1987, 27 697. 8. D. B. Marshall, B. N. Cox, and A. G. Evans, Acta Metall., 1985, 33 2013. 9. B. N. Cox, N. Sridhar, and C. R. Argento, Acta Mater., 2000, 48 4137. 10. B. N. Cox and D. B. Marshall, Acta Metall. Mater., 1991, 39 579. 11. M. R. Begley, B. N. Cox, and R. M. McMeeking, Acta Metall. Mater., 1995, 43 3927. 12. M. R. Begley, A. G. Evans, and R. M. McMeeking, J. Mech. Phys. Sol., 1995, 43 727. 13. M. R. Begley, B. N. Cox, and R. M. McMeeking, Acta Metall. Mater., 1997, 45 2897. 14. B. N. Cox, D. B. Marshall, R. M. McMeeking, and M. R. Begley, Solid Mech. Appl., 1997, 49 353. 15. C. H. Henager, Jr. and R. G. Hoagland, Ceramic Trans., 2001, 124 315. 16. J. A. DiCarlo, Ceramurgia, 1998, 28 88. 17. C. F. Windisch, Jr., J. Charles H. Henager, G. D. Springer, and R. H. Jones, J. Am. Ceram. Soc., 1997, 80 569. 18. Y. T. Zhu, S. T. Taylor, M. G. Stout, D. P. Butt, and T. C. Lowe, J. Am. Ceram. Soc., 1998, 81 655. 19. J. A. DiCarlo, H. M. Yun, G. N. Morscher, and J. C. Goldsby, Ceram. Trans., 1995, 58 343. 20. W. H. Glime and J. D. Cawley, J. Am. Ceram. Soc., 1998, 81 2597. 21. S. V. Nair, K. Jakus, and T. J. Lardner, Mech. Mater., 1991, 12 229. 22. H. M. Yun and J. A. DiCarlo, Ceram. Trans., 1996, 74 17. 23. R. E. Tressler and J. A. DiCarlo, Ceram. Trans., 1995, 57 141. 24. F. Abbe, J. Vicens, and J. L. Chermant, J. Mater. Sci. Lett., 1989, 8 1026. 25. J. L. Chermant, F. Abbe, and D. Kervadec, Creep Fract. Eng. Mater. Struct., Proc. Int. Conf., 5th, , 1993, 371. 26. X. Wu and J. W. Holmes, J. Am. Ceram. Soc., 1993, 76 2695. 27. G. Grathwohl, B. Meier, and P. Wang, Key Eng. Mater., 1995, 108-110 243. 28. A. G. Evans and C. Weber, Mater. Sci. Eng., A, 1996, A208 1. 29. D. R. Mumm, W. Morris, M. S. Dadkhah, and B. N. Cox, ASTM Spec. Tech. Publ., 1997, STP 1309 102. 30. M. Mizuno, S. Zhu, Y. Kagawa, and H. Kaya, Key Eng. Mater., 1997, 132-136 1942. 31. B. Cox and F. Zok, Brittle Matrix Compos. 5, Proc. Int. Symp., 5th, , 1997, 487. 32. B. Wilshire, F. Carreno, and M. J. L. Percival, Scr. Mater., 1998, 39 729. 33. J.-L. Chermant and G. Boitier, Adv. Compos. Mater., 1999, 8 77. 34. S. Zhu, M. Mizuno, Y. Kagawa, J. Cao, Y. Nagano, and H. Kaya, J. Am. Ceram. Soc., 1999, 82 117. 35. R. E. Tressler, K. L. Rugg, C. E. Bakis, and J. Lamon, Key Eng. Mater., 1999, 164-165 297. 36. A. G. Evans, F. W. Zok, R. M. McMeeking, and Z. Z. Du, J. Am. Ceram. Soc., 1996, 79 2345. 37. F. E. Heredia, J. C. McNulty, F. W. Zok, and A. G. Evans, J. Am. Ceram. Soc., 1995, 78 2097.

RkJQdWJsaXNoZXIy MjM0NDE=