P ト張力T 荷重 Load P 2ro α u シーT a L Figure 6:Equilibrium of forces between CFS and cylinder 4.2 Comparison between analytical results and experimental results Table 4 shows the comparison between the analytical results and experimental results obtained with large specimens at Gc = 0.4 kN. In the analysis, it was assumed that the maximum load and the maximum displacement were reached when the sheet peeled off completely. In terms of both the maximum load and maximum displacement, the analysis values agree well with the experimental values. TABLE 4 COMPARISON BETWEEN EXPERIMENTAL AND ANALYSIS VALUES (Gc = 0.4 kN/m) Specimen No. Max. Load Max. disp. Max. Load Max. disp. Max. Load Max. disp. kN mm kN mm kN mm L-1 20.0 43.5 17.0 43 0.85 0.99 L-2 34.2 78.8 23.9 71 0.70 0.90 L-4 23.7 42.6 26.1 43 1.10 1.01 L-5 26.5 33.3 29.1 32 1.10 0.96 L-6 21.9 44.8 24.6 48 1.12 1.07 L-7 15.2 57.4 16.4 48 1.08 0.84 Analysis Experimental Experimental /Analysis 4. CONCLUSIONS In order to confirm the effect of CFS bonded to the surface of concrete to the prevention of concrete pieces from spalling from a concrete structure, we carried out a series of punching shear test experiments. In the experiments, the parameters such as CFS type, diameter of a cylinder simulating concrete piece which spalls, and bonding length of CFS were varied. And a new analytical technique that uses the interfacial fracture energy Gc was proposed. By comparing the analysis results with the experimental results, we could obtain the following conclusions. 1) When a CFS is bonded in two layers, one orthogonal to the other, the load of punching shear is almost proportional to the displacement of the concrete indenter or the peeling length of the CFS. 2) By applying our new analytical technique that uses interfacial fracture energy Gc between CFS and concrete (when the sheet is bonded in two layers, one orthogonal to the other), it is possible to accurately calculate the maximum load, maximum displacement, merely by determining the value of Gc experimentally. REFERENCES 1) Asakura,S., Kojima,Y., Takahashi,T., Yoshizawa,H.: Experimental study on effect of continuous fiber sheet to prevent spalling of tunnel lining concrete, First-Australasian Conference on Composite Materials (ACCM-1), pp.106-1-106-4,1998 . 2) Wu,Z., Asakura,S., Yoshizawa,H., Yuan,.H., Kobayashi,A., and Takahashi,T.: Experimental and analytical studies on peeling behavior and spalling resistance effect of externally bonded continuous fiber sheets. J. Materials, Conc. Struct., Pavements, JSCE, No.662/V-49,pp.45-58, 2000.11.
RkJQdWJsaXNoZXIy MjM0NDE=