ORAL/POSTER REF. ICF100104PR Experimental and Finite Element Analysis of Fracture Criterion of Extra Deep Drawn Steel Sheets Dhananjay M. Kulkarni 1 and Ravi Prakash 2 1 Educational Hardware Division 2 Dean Research & Consultancy Division Birla Institute of Technology and Science Birla Institute of Technology and Science Pilani, Rajasthan (333 031) India Pilani, Rajasthan (333 031) India ABSTRACT The efforts made over the last three decades to understand fracture behaviour of structural material in elastic and elasto-plastic fracture mechanics regimes are numerous, whereas investigations related to fracture behaviour of materials in thin sheets or gross yielding fracture regimes are limited in number. The prevention of failure in stressed structural components currently requires fracture mechanics based design parameters like fracture toughness or critical crack-tip opening displacement. The present attempt would aim to fulfill this gap and generate more information thereby increased understanding on fracture behaviour of sheet metals. In the present investigation, using a recently developed technique for determining fracture criteria in sheet metals, results are generated on fracture toughness and verified with Finite Element analysis. At the end it is concluded that magnitude of fracture toughness of thin sheets increases with increase in thickness, unlike that for thick plates. KEY WORDS Extra Deep Drawn Steel Sheets, Fracture Criterion, Gross Yielding Fracture Mechanics, Cracktip opening Displacement. INTRODUCTION In recent years, there have been considerable emphasis in the production of Deep Drawing and Extra Deep Drawing (EDD) steel in industries. The wide applications of EDD steel are not only well known for domestic appliances like storage containers, household utensils but also for automobile industries for manufacturing car bodies. With increasing global competition for quality materials, there is a need to understand the fundamentals of crack initiation in these bulk products. The characterization of thin sheets is presently being done with the help of empirical engineering simulative tests like Erichsen cup test, Olsen cup test and hole expansion test. The principle of the above tests, in general, attempt to search for an engineering parameter which indicates the mechanical environment for crack initiation and/or propagation [1] under the corresponding experimental conditions for each of these tests. The event of crack initiation and
RkJQdWJsaXNoZXIy MjM0NDE=