ICF10B

Oral/Poster Reference: ICF100285OR FATIGUE DAMAGE IN ADVANCED POLYMER MATRIX COMPOSITES H. E. Carroll1, T. J. Matthams1, D. M. Knowles1 and A.J. Davies2 1Department of Materials Science, Cambridge University, Cambridge, CB2 3QZ, UK 2DERA Farnborough, Ively Road, Farnborough, Hampshire, GU14 0LX, UK ABSTRACT Advanced polymer matrix composites such as carbon fibre reinforced composites (CFRP) offer many advantages over more traditional materials such as metals. However, due to a lack of understanding of the materials behaviour, especially under in-service conditions such as fatigue, these materials are not being used to their full capability. This work investigates the fatigue response and damage mechanisms of a carbon fibre reinforced polymer with a quasi-isotropic lay-up, [(±45˚, 90˚, 0˚)2]s. Fatigue tests have been carried out at R ratios of +0.1 (tensile) and +10 (compressive) using thermography to identify damage. Results show that delamination is the major damage mechanism and that the main delamination occurs at a different interface for the different loading conditions. The interfaces highlighted in the fatigue tests are being investigated using a modified mixed-mode bend test. KEYWORDS Composite, Fatigue, Delamination. INTRODUCTION Advances have been made in the design, manufacture and application of composite materials. Much of this progress has been made in the field of Fibre-Reinforced-Plastics (FRP). FRP often have greater strength to weight and stiffness to weight ratios than traditional materials such as metals, which makes them ideal for use in many applications especially in the aerospace sector. However, there remain many unanswered questions regarding the behaviour of these materials especially under in-service conditions such as fatigue. There is an increasingly urgent need to gain an better understanding of how FRPs behave under fatigue load cases. Until recently the strains used in the design of aircraft structures have been so low (approximately 0.4%, but with a safety factor of 50% the expected peak is around 0.27%) that fatigue has not been considered an issue(1) and static properties have been used in design. This is now changing as designers want to use composite materials to their full capability and therefore

RkJQdWJsaXNoZXIy MjM0NDE=