If damage is associated to strain and fatigue does not introduce any new damage mechanism, it follows that constant strain amplitude cycling should not result in material fatiguing. Bonora et al. [8] have verified this assumption in glass/epoxy laminates. In addition, experimental tests performed on laminates previously damaged at different D values, shown the absence of evolution of damage state in the usual fatigue life range (< 5E106 cycles). It has to be said that even though the under constant strain amplitude the damage generated in the first cycle does not growth, additional damage mechanism such as localized delamination can initiated as a result of internal friction. According to the authors experience these phenomena are activated in the very late part of the laminate life with a very weak effect on the material stiffness changes. CONCLUSIONS The strain-based approach proposed by the authors to describe fatigue performance of composite laminates seems to indicate a better way to understand material response under stress controlled conditions. The experimental tests performed on different laminate stacking sequences confirm that under strain controlled condition no damage evolution occurs. Damage is controlled by the maximum strain in the first cycle. Under constant stress amplitude, strain increases with cycles as a result of the change in stiffness, resulting in an apparent damage evolution, as usually observed in the literature where fatigue resistance is evaluated looking at the number of cycles before failure. The proposed framework is consistent with the fatigue life diagram proposed by Talreja that represent a valid way for developing a reliable tool for fatigue design. It is the authors’ opinion that the evolution of strain under constant stress fatigue should be more thoroughly investigated in order to come up with a relationship to correlate strain evolution with cycles and damage. REFERENCES 1 Laws, N., and Dvorak, G. J., 1985, in Proc. Of IUTAM Eshelby memorial Symp., Cambridge press, pp. 119-127. 2 Hashin, Z, (1986), Engineering fracture mechanics, 25, pp:771-778. 3 Hashin, Z., (1985), Mechanincs of materials, 4, pp:121-136. 4 Allen, D.H., Harris, C.E., Groves, S.E. and R.G:, Norvell, (1987), International Journal of Solids and Structure, 23, pp:1319-1338. 5 Talreja, R., (1987), in Fatigue of Composite Materials, Lancaster, Technomic Publishing Co., pp. 113-122. 6 Bonora, N. and Newaz, G., (1997), ASME J. of Engineering Material and Technology, Vol. 119 7 Newaz, G. M., and Bonora, N., (1996), in Thermal and Mechanical Test Methods. and Behavior of Continuous Fiber Ceramic Composites, ASTM STP 1309, M. G. Jenkins, S. T. Gonczy, E. Lara-Curzio, N. E. Ashbaugh and L. P. Zawada, Eds., American Society for Testing and Materials 8 Bonora, N., Newaz,G., and Nusier S., Proc. of the 8th US-Japan Conference on Composite Materials, Sept. 24 and 25 , Baltimore, 1998
RkJQdWJsaXNoZXIy MjM0NDE=