ICF10B

three fundamental fatigue limits. That is why, for laboratory tests on materials, the scatter of microstructural variables on Stage I cracks such as grain size, barrier thicknesses and strengths, now demand more detailed studies. Regarding components, effects of slight changes in surface profiles and the surface texture are in want of separation whereas for structures the effect of minor variations in initial defect / crack sizes and external loading variables are very important. It needs to be recognized that a few overload cycles, a transient change in the environment and /or temperature (including thermal shock) may have a far more serious effect on tests to specify material behaviour and Stage I growth than, say, for a structure already weakened by a noticeable Stage II crack. 4. Conclusion The initiation of the first fatigue crack means usually very little for the exhaustion of the actual fatigue life of girders with breathing webs. Moreover, the post-initiation residual lifetime very considerably varies as a function of the web geometry and of the intensity of repeated loading: it is small for very slender webs and high loads, but can be very large for the other cases. For webs of usual depth-to-thickness ratios and subjected to usually encountered load ranges, a design base on crack initiation would be conservative and would substantially reduce the competitiveness of steel in bridge and similar construction. Fatigue failure appears to be a more rational basis for the definition of the fatigue limit state of breathing webs because, from the point of view of the cumulative damage process, it is equally “just” for all girders - their geometry and loading level notwithstanding. In its light it is required that no fatigue failure shall occur before the planned fatigue life of the girder is fully exhausted - which is the objective of fatigue analysis. In the case of webs under the action of many times repeated predominantly shear, the maximum depth-to-thickness ratio of those webs for which the effect of breathing can be disregarded for all loading ranges is less than 175, and will be specified by further research. Knowledge of the characteristics of cracks has become increasingly important especially as for their size, shape, orientation and growth rate together with their initial and final geometries. The relevant developments in metal fatigue to be accomplished in the next century will be pertinent to the development of techniques to measure and continuously monitor fatigue cracks, inclusive of particularly those of 10-7 to 10-9 mm in size inside the metal. For engineering components, the major tendency will be concerned with improvements to the fatigue resistance of surfaces. In the case of structures, crack detection systems will be improved and significant advancements made owing to the effect of changing structural compliance on local crack growth characteristics. Ageing aircrafts, nuclear plants, long-life oil rigs and pipelines, fast ground-transport and ships, will present ever-increasing matters, but we hope that fracture mechanics, in all its forms, will progress for its early development stages and be put into practice with appropriate imperativeness in every branch of engineering industry. 5. Acknowledgement The author gratefully acknowledges the financial support of the presented research by the Grant Agency of the Czech Republic (project No. 103/00/0897). 6. References [1] Škaloud, M., Roberts, T. M.: Fatigue crack propagation in slender webs breathing under repeated loading. Journal of Constructional Steel Research, spec. issue: Second World Conference on Steel in Construction, San Sebastian, 1998, pp. 417-419. [2] Miller, K. J., ASTM STP 1296, Fatigue and Fracture Mechanics: 27th Volume (R.S. Piascik, J. C. Newman and N. E. Dowling, Eds.), 1997, pp. 267-286.

RkJQdWJsaXNoZXIy MjM0NDE=