AE waveform matching method. Results are summarized below: 1. No static fatigue strength degradation was found for this ceramic, while cyclic fatigue degradation appeared. 2. ∆P-increasing tests with different initial value of maximum stress, σmax,i, enabled us to evaluate the cyclic loading condition under which fatigue damage nucleated. The result suggested that σmax,i influenced the maximum stress at failure, σmax,f, for statistically weak specimens and thus fatigue damage developed at lower stress levels. 3. Crack volume produced during the cyclic loading was estimated by Lamb AE waveform matching method and found to be six times smaller than that produced during static loading. 4. Initial crack was observed at large-grown columnar β-Si3N4 under both loadings. For the quasi-static loading, the crack volumes estimated by the AE waveform matching method well agreed with that produced at columnar β-Si3N4, while those for the cyclic loading were ten times smaller than ∆V estimated by FEM. 5. Fatigue mechanism of the toughened Si3N4 is discussed based on the strength distribution and AE results. ACKNOWLEDGEMENTS Authors are grateful to Dr. Urashima, NGK Spark Plug Company, for supplying the toughened silicon nitride specimens. REFERENCES 1. T. Yamada, T. Hoshide and H. Furuya, J. Soc. Mat. Sci., Japan, 33(364), 28-33(1983) [in Japanese]. 2. T. Ogawa, Proc. The 13th European Conference on Fracture, Elsevier Science CD, 186C1.PDF, p.8 (2000). 3. O. Ritchie and H. Dauskardt, J. Ceramics Society Japan 99(10), 1047-1062(1991). 4. M. Takemoto, O. Tamura and H. Suzuki, Progress in Acoustic Emission IX, Ⅲ, 81-88(1998). 5. K. Urashima, Y. Tajima, M. Enoki and T. Kishi, Proc.11th Forum on Basic Science of High Temperature Ceramics,66-70(1992). 6. T. Sato, M. Takemoto and K. Ono, Jpn Appl. Phys., 39, 3193-3200(1999).
RkJQdWJsaXNoZXIy MjM0NDE=