FRACTURE BEHAVIOR OF A SICw/6061AL ALLOY COMPOSITE UNDER CYCLIC LOADING Lei WANG*1 T. KOBAYASHI2 Z. M. SUN3 and H. TODA2 1Department of Mechanical Engineering, Tottori University, Koyama 4-101, Tottori 680-8552, Japan 2Department of Production Systems Engineering, Toyohashi University of Technology,Tempaku-cho 1-1, Toyohashi, 441-8580, Japan 3Materials Engineering, Tohoku National Industrial Research Institute, Nigatake 4-2-1, Sendai 983, Japan ABSTRACT The fracture behavior of a SiC whisker reinforced 6061 aluminum alloy matrix composite under cyclic loading were investigated at both room and elevated temperatures with total strain controlled method. TEM and SEM were used to examine the microstructure and fracture surfaces of the specimens. The mechanical test results demonstrated that the composite materials maintained initial cyclic hardening. Under cyclic loading, the composite material failures with a mechanism of void‘s nucleation, growth and coalescence,which are near the end of SiC whisker reinforcements. KEYWORDS: fracture behavior, cyclic loading, SiCw/6061Al, low cycle fatigue 1. INTRODUCTION In order to reduce the fuel consumption and improve thermal efficiency of engines, aluminum matrix composites have been used for the new engine parts. For instance, the material used in the present study, SiCw/Al composite, is being used in motor parts of Suzuki engines[1]. However, a detailed understanding of the resistance of this material to cyclic deformation and low cycle fatigue fracture is required for further * Corresponding Author: Associate Professor Lei WANG Phone & Fax: +81-857-31-6786, E-mail: lwang@mech.tottori-u.ac.jp
RkJQdWJsaXNoZXIy MjM0NDE=