ICF10B

predicts improved mechanical performance with thinner insulating and metallic layers, the minimum acceptable thicknesses are determined by the required electrical properties of the metallic grid. All the electronic concepts studied required that the insulating film between the component and wires be on the order of c/a0 = 0.04 or greater so that the sensor would have an acceptable impedance. Although the work to date has shown that the proposed sensor is viable, many challenges lie ahead before such a sensor can be demonstrated in an operating engine. REFERENCES [1] Barranger, J.P. (1984) “Eddy Current Jet Engine Disk-Crack Monitor”, Materials Evaluation, Vol. 42. [2] Chari, M.V.K., Bedorsian, G., Fealey, J.A., Sober, T.J. and Scheibel, J. (1988) “Incipient Failure Prediction of Rotating Electrical Machinery by Eddy Current On-Line Monitoring Method”, IEEE Transactions on Magnetics, Vol. 24. [3] Cartz, L. (1995) Nondestructive testing : radiography, ultrasonics, liquid penetrant, magnetic particle, eddy current, ASM International. [4] Tietze, M. (1990) “New aspects in aircraft inspection using eddy current methods”, AGARD, Impact of Emerging NDE-NDI Methods on Aircraft Design, Manufacture, and Maintenance, N90-28068, pp. 22-38. [5] Auciello, O. (1999) “In situ process diagnostics and modeling”, Materials Research Society symposium proceedings, ISSN02729172, Vol. 569. [6] Elshabini-Riad, A. and Barlow, F.D. (1998) Thin film technology handbook, McGraw-Hill, New York. [7] Lei, J.F., Martin, L.C. and Will, H.A. (1997) “Advances in thin film sensor technologies for engine applications”, NASA-TM-107418. [8] Metev, S. M. (1998) “Laser-assisted microtechnology”, Springer series in materials science, ISSN0933-033X, Vol. 19. [9] Dharan, C.K.H. (1986) “Delamination fracture toughness of composite spacecraft structures”, ESA Proceedings of a Workshop on Composites Design for Space Applications, N86-30758, pp. 159-167. [10] Forth, S.C. and Keat, W.D. (1998) “A 3D Nonplanar Fracture Model for Life Prediction”, Recent Adv. In Mech. of Aerospace Struct. & Mat., ASME Press, AD-Vol. 56. [11] Selcuk, S., Hurd, D.S., Crouch, S.L. and Gerberich, W.W. (1994) "Prediction of interfacial crack path: a direct boundary integral approach and experimental study", Int. J. of Fracture, Vol. 67, pp. 1-20. [12] Lu, M. C. (1980) “Stress intensity factors in two bonded elastic layers containing cracks perpendicular to and on the interface”, NASA-CR-159218. [13] Keat, W.D. and Forth, S.C. (1997) “Growth of 3D Curved Cracks Towards a Bimaterial Interface”, Developments in Mechanics, Vol. 19, pp. 2-7 - 2-9. [14] Knappe, W. and Schneider, W. (1973) “The role of failure criteria in the fracture analysis of fibre-matrix composites”, Deformation and Fracture of High Polymers, ed. H.H. Kausch, J.A. Hassell and R.I. Jaffee, Plenum Press, New York, pp. 543-556.

RkJQdWJsaXNoZXIy MjM0NDE=