ICF10B

FRACTURE IN METAKAOLIN CONCRETE UNDER DIFFERENT LOADING CONDITIONS B. B. Sabir and S. Wild School of Technology, University of Glamorgan, Pontypridd, CF37 1DL, UK ABSTRACT The study presents the results of fracture tests conducted on concrete in which metakaolin is used to partially replace the cement. The energy required to cause catastrophic failure in concrete cubes containing two symmetrical notches is determined using two approaches. The first is based on the stress intensity factor determined by finite element analysis and the second utilises the energy absorbed by the test specimen up to failure. The test methodology enables estimates to be made of the extent of tortuosity of the fracture surface. The tests are conducted in a stiff testing machine under axial and eccentric loading conditions. The notched samples were allowed to cure in water at room temperature until testing at 28 and 91 days. It is found that increasing cement replacement levels by metakaolin (up to 15%) results in systematic increases in compressive strength and fracture energy. Metakaolin is also found to reduce the tortuosity of the fracture surface. This phenomenon is attributed to the additional strength imparted to the paste component of the matrix and the reduction in the thickness of the interfacial layer, resulting in more composite action between the paste and the coarse aggregates. Visual inspection of the fracture surfaces confirms the role played by the incorporation of metakaolin in causing the fracture to propagate across the coarse aggregates, thus resulting in smother surfaces. KEYWORDS Metakaolin, Compact specimen, Fracture, Tortuosity. INTRODUCTION There are two main approaches in fracture mechanics for determining the fracture toughness. These are characterised by Ef, which is the fracture energy required to create a crack extension of unit area and Kc, which is the critical value of the stress intensity factor. Several investigations, e.g. [1-3], have been carried out to assess the fracture parameters in concrete using approaches recommended in [4,5]. Despite the testing complexities involved the results of such investigations have not been consistent and controversy exists regarding the applicability of these tests. Furthermore, the tests employ specimens of relatively large sizes, which render them to be impractical and expensive in practice.

RkJQdWJsaXNoZXIy MjM0NDE=