ICF10B

energy release rate Gc, or fracture energy, as follows: ( 1) ) (1 2 2 µ − = E K G c c Where E is the elasticity modulus and µ is Poisson’s ratio. The fracture energy Ef can be determined from the load-displacement relationship recorded during the test, viz: (2) ( 2 ) d d a W E s f − = Where d is the specimen size, a is the notch size and Ws is the energy consumed in producing the new fracture surface. Full details of the calculation procedure are given in [9]. MATERIALS AND TESTING Four concrete mixtures were prepared to manufacture the test specimens. Metakaolin (MK) was employed as a partial cement replacement material at 0, 5, 10 and 15%. The mixture without MK is referred to as the control concrete. In all the mixtures, the water to total binder (PC+MK) ratio was kept constant at 0.45. Natural sea-dredged sand of grading M-F complying with BS 882: 1983 and 10mm crushed limestone were used throughout the investigation. The mix proportions of biner:sand:limestone were 1:1.7:3 and the PC content in the control concrete was 395 kg/m3. A polymeric sulphonate based superplasticiser was added at a dosage of 1 % of the weight of the binder. The concretes produced slumps varying between 15 and 50 mm. CCEL and CCAL specimens were prepared by means of standard 100 mm steel moulds. Symmetrical notches (30 mm deep) were introduced after curing for 21 days in water at 20oC. After notching, the specimens were returned to the curing tanks until testing at 28 or 91 days. The fracture tests were conducted at ambient room temperature using a 250 kN Instron testing machine. Further specimens were prepared to evaluate the compressive strength fc, the modulus of elasticity E and the modulus of rupture MOR. The results of testing at 28 and 91 days are shown in Table 1. It can be seen that in all cases there are systematic increases in the mechanical properties as the MK content increases. This is attributed to the pozzolanic reaction and the filler effect derived TABLE 1 MECHANICAL PROPERTIES Results at 28 days Results at 91 days MK (%) fc (MPa) E (GPa) MOR (MPa) fc (MPa) E (GPa) MOR (MPa) 0 5 10 15 63.1 64.3 67.2 73.1 35.1 37.3 38.5 40.1 8.4 9.2 10.5 11.1 64.2 68.1 71.5 74.3 36.2 37.0 39.1 40.5 9.1 10.1 10.8 11.3

RkJQdWJsaXNoZXIy MjM0NDE=