ICF 1001-007 OR FRACTURE MECHANICAL CHARACTERIZATION OF SEMICRYSTALLINE THERMOPLASTICS H.H. Kausch, Ch. Grein, Ph. Béguelin, R. Gensler Département des Matériaux, Ecole Polytechnique Fédérale de Lausanne (EPFL) CH 1015 – Lausanne ABSTRACT The different modes of fracture of a (semi-crystalline) polymer are determined by the competition between different deformation and damage mechanisms. Their molecular and structural origins and their effect on fracture toughness are discussed using rubber-modified polypropylene (PP/EPR) as main example. Toughness has been assessed using the J-Integral, the Essential Work of Fracture (EWF) and the Linear Elastic Fracture Mechanics (LEFM) concept with plastic zone correction. For relatively ductile, strain-rate sensitive materials the first two methods gave ambiguous results whereas unique values of toughness Keff and strain energy release rate Geff were obtained from properly corrected LEFM data. As an additional advantage the latter approach can be used in a wide range of strain rates extending from slow creep to impact loading (at 7m/s) thus permitting the study of brittle-ductile transitions, often the most sensitive property to characterize the impact performance of a polymer [1]. KEYWORDS Toughness, semi-crystalline polymers, molecular mechanisms, plastic zone correction, strain-rate sensitive materials, ductile-brittle transitions, impact performance. INTRODUCTION High stiffness and fracture toughness are still among the most important mechanical properties. The deformation and fracture behavior of semi-crystalline thermoplastics is strongly influenced by structural features from three different levels of organization: by molecular configuration (chain length, tacticity), the physical structure of the crystal lamellae, and by their heterogeneous, frequently spherulitic morphology. In addition the state of stress (presence of modifier particles, sample geometry) and the rate of loading play an important role. In order to direct the development of these attractive materials and to optimize their application reliable methods of physical and continuous mechanical characterization are needed. By continuous we understand a method, which works with identical specimen geometry in wide range of strains, strain rates and temperatures.
RkJQdWJsaXNoZXIy MjM0NDE=