ORAL REFERENCE: ICF100719OR FRACTURE MECHANICS CHARACTERISATION OF EPOXY RESINS BY MEANS OF MINI-COMPACT-TENSION-SPECIMENS C. Bierögel1, H. Walter2, W. Grellmann1, H. Henning3, B. Michel4 1 Department of Engineering Science, Martin-Luther-University of Halle-Wittenberg, Halle, D 06099, Germany 2 Angewandte Micro-Messtechnik GmbH, Berlin, D 15834, Germany 3 Leuna-Harze GmbH, Leuna, D 06233, Germany 4 Fraunhofer Institute of Reliability and Microintegration, Berlin, D 13355, Germany ABSTRACT Epoxy resins typically show a high modulus of elasticity and nearly elastic stress-strain behaviour, but poor resistance to fracture. In case of micro-electronic applications such as chips a complex material behaviour occurs due to different mechanical and thermal properties throughout the sandwich, which can influence the mechanical and thermal reliability as well as the life time. The produced residual stress and material inhomogeneities as well as the high thermal gradients cause local defects such as cracks in the sandwich structure. As a result of this failure behaviour fracture mechanics methods are increasingly used for characterising and optimising the toughness of epoxy resins. Applying fracture mechanics concepts makes it possible to gain much information to characterise fracture toughness of new-developed or modified materials using miniaturised specimens. In this study the influence of chemical structural parameters, filler content and filler geometry, and test conditions on the crack resistance behaviour and fracture mechanics parameters is examined. The investigation of fracture using small specimens is based upon analysing crack resistance against stable and unstable crack growth behaviour under quasi-static loading of standard specimens by means of experimental fracture mechanics. Furthermore, in this paper fracture properties and toughness behaviour of differently filled and modified epoxy resins for microelectronics applications are investigated. KEYWORDS Fracture Behaviour, Toughness, Compact-Tension-Specimen, Crack Initiation and Propagation, Epoxy Resin, Laser double scanner INTRODUCTION Epoxy resins are used in a wide range for microelectronics application and electronic packaging [1]. At room temperature crosslinked epoxies typically exhibit a high modulus and a nearly elastic stressstrain behaviour, but they have poor resistance to fracture. A complex material behaviour can often be
RkJQdWJsaXNoZXIy MjM0NDE=